This website uses cookies to ensure that we give you the best experience on our website.
By continuing to browse the site you are agreeing to our use of cookies. To find out more click here

Weber Saint-Gobain - Official website of the company

webertec cable grout

webertec cable grout
webertec cable grout

Product Benefits

  • Runway airport lighting 
  • Taxiways and hardstanding 
  • Communication cables in sawn slots

Fast-setting pourable grout for filling cable slots

Product Features

About this Product

webertec cable grout is a three-component low-modulus, semi-flexible polyester resin compound for filling cable slots. Can be used in asphalt, bitumen and concrete surfaces. Use for gaps 5 mm to 16 mm wide.

Features and Benefits

  • Easy to mix and place
  • Does not segregate or bleed
  • Rapid setting for quick return to service
  • Can be used in cold weather down to 5°C
  • Good abrasion resistance
  • Excellent chemical resistance
  • Available in black

Technical Services

weber's Customer Services Department has a team of experienced advisors available to provide on-site advice both at the specification stage and during application. Detailed specifications can be provided for specific projects or more general works. Site visits and on-site demonstrations can be arranged on request.

Technical helpline
Tel: (01525) 722110
Fax: (01525) 718988

Sales Contact

weber products are distributed throughout the UK through selected stockists and distributors. For UK sales enquiries and overseas projects, contact weber's Sales office.

Sales office
Tel: (01525) 722100
Fax: (01525) 718988


Send or download the documents

You can either send the documents to an email address, or download it

Preparation & Application


All surfaces must be mechanically sound, dry and clean. All saw cuts should be free of slurry, dirt, dust, grease, oil or any other contaminants.

Saw cuts should be as narrow as possible, depending on cable size.

Surfaces should provide a textured, mechanical key for full bond.

The edges of slots should be cut sharp.

New concrete should be at least 7 days old prior to grouting.


Pour the resin into a clean plastic or other suitable container and gradually add the small bag containing hardener. Mix thoroughly. Now add the large bag containing filler and mix until a uniform colour and consistency is achieved. Small quantities can be mixed by hand using a spatula. Large quantities should be mixed mechanically.


Immediately after mixing, pour webertec cable grout into the prepared slot using a funnel or tun dish.

Top up as required within 2 hours.

webertec cable grout is not intended for filling large voids. For gaps wider than 16 mm, use webertec cable grout mixed with clean, dry, rounded aggregate up to 5 mm diameter. Up to 10 kg of aggregate can be used for gaps not exceeding 30 mm.

Setting times are dependent upon temperature. These are shown in the Technical Data table.


Clean tools with webertec solvent 3 before the grout sets.

Packaging, Health & Safety


webertec cable grout is supplied in 19 kg packs

Coverage / Yield

Yield is 11 litres per pack.

Storage and Shelf Life

Store in a cool, dry place out of direct sunlight. Shelf life in correct storage conditions is at least 12 months.

Protect from frost.

In hot weather conditions it is advisable to keep the product in refrigerated containers, transferred to insulated chambers/boxes on site.

Health and Safety

For further information, please request the Material Safety Data Sheet for this product.