This website uses cookies to ensure that we give you the best experience on our website.
By continuing to browse the site you are agreeing to our use of cookies. To find out more click here

Weber Saint-Gobain - Official website of the company

webercote smooth

webercote smooth
webercote smooth

Product Benefits

webercote coating can be applied to most building materials, e.g. concrete, blockwork, masonry & renders ● They are not recommended for common Fletton brickwork ● webercote smooth may be applied to brickwork for decorative purposes

Protective and anti-carbonation coating

Product Features

About this Product

The webercote smooth coating system provides excellent anticarbonation protection with a minimum 15 years life expectancy. webercote smooth is both protective and decorative. The system can be applied by brush, roller or spray. This product has been formulated to comply with the requirements of BS EN 1504-2.

Features and Benefits

▲ Excellent anti-carbonation coatings ▲ Durable - life expectancy in excess of 15 years ▲ Resistant to chloride ion ingress ▲ Coatings allow vapour diffusion ▲ This product has been formulated to comply with the requirements of BS EN 1504-2

Technical Services

weber 's Customer Services Department has a team of experienced advisors available to provide on-site advice both at the specification stage and during application. Detailed specifications can be provided for specific projects or more general works. Site visits and on-site demonstrations can be arranged on request.

Technical helpline
Tel: (01525) 722110
Fax: (01525) 718988

Sales Contact

weber products are distributed throughout the UK through selected stockists and distributors. For UK sales enquiries and overseas projects, contact weber's Sales office.

Sales office
Tel: (01525) 722100
Fax: (01525) 718988


Send or download the documents

You can either send the documents to an email address, or download it


webercote smooth & EC - standard

Preparation & Application


If considered necessary, substrates should be primed with webercote primer.

New surfaces should be clean, sound and dry. Concrete must be free of coatings or mould oil and any laitance should be removed following which the surface should be primed with webercote primer.

Old surfaces must also be clean, sound and dry. Glossy surfaces should be roughened to provide a key. Lichen, moss or fungal growth must be removed and the areas treated with weber CL150 applied in accordance with the instructions on the data sheet*.

Chalky or friable surfaces or previously decorated surfaces which are flaking should be wire brushed to remove loose materials and then stabilised by one coat of webercote primer.

* Full data sheet available from weber on request.


For complete protection, a two coat application by brush, roller or spray is recommended.

Apply webercote smooth at a minimum of 150 µm wet film thickness per coat.

Depending on drying conditions and surface suction the webercote smooth coating may be given a second coat in as little as 2 to 4 hours.

Do not apply below 4°C, when frost is expected or during rainfall.

Packaging, Health & Safety


All webercote coatings are supplied in pails containing 9 litres of material. webercote primer is supplied in 5 litre plastic containers.

Storage and Shelf Life

Protect from frost. Store in clean, dry conditions between 5°C and 30°C. When stored in correct conditions a shelf life of 2 years can be expected.



Health and Safety

Essentially not hazardous.
Not harmful during normal use.
After contact with skin, wash immediately with plenty of water.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Keep out of the reach of children.

For further information, please request the Material Safety Data Sheet for this product.