weberfloor smooth 4150
Packaging
- 25kg
Self-smoothing flooring compound suitable for residential and commercial areas. Can be used as a levelling compound and finished with various floor coverings.
weberfloor smooth 4150 is a self-smoothing flooring compound — commonly referred to as a self levelling compound or self levelling screed — which can be applied to depths of 2-30mm and used for levelling:
- Concrete
- Sand/cement screeds
- Anhydrite screeds
- Can also be used as a levelling compound for any of our weberfloor base or renovation screeds
weberfloor smooth 4150 self-smoothing flooring compound is suitable for covering with:
- Vinyl/linoleum
- Carpet
- Laminate flooring
- Parquet flooring*
- Tiles
Suitable for use in residential and commercial areas, light foot traffic is possible after 2-4 hours in normal conditions and the final floor covering can be installed in as little as 3 days, depending on layer thickness and site conditions.
* May require extended time before covering
- For application depths between 2-30mm
- Weber Low Dust TechnologyTM improves comfort of applicators
- Pump or hand applied
- Foot traffic after 2-4 hours
- Floor covering can be installed in as little as 3 days, depending on layer thickness and site conditions
- Excellent spreading and smoothing characteristics
- Low alkalinity
- Casein-free
- Low emissions
- Cannot be used on external projects
- Not to be left without a suitable floor covering
- Not to be used where some movement is expected (eg. underfloor heating), for these substrates the floor should be levelled with weberfloor fibre 4310 or weberfloor fibre rapid 4320
- When stored unopened in a cool, dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture
- Please refer to relevant building regulations prior to the installation of weberfloor products
Temperature of application | +10°C to +25°C |
Minimum substrate strength | 1N/mm² |
Minimum thickness | 2mm |
Maximum thickness | 30mm |
Water addition | 5 litres/25kg (20%) |
Compressive Strength | C 25 |
Flexural strength | F 6 |
Shrinkage (28 days) | < 0.05% |
Flow Rate | 240-255mm |
Approx. material consumption | 1.7kg/m²/mm |
Hardening time (before foot traffic) | 2-4 hours in normal conditions |
Hardening time (before final covering) | Floor covering can be installed in as little as 3 days, depending on layer thickness and site conditions |
Pot life | 20 |
Wear resistance (RWA class) | RWFC 450 |