weberpral M
Packaging
- 25kg
Through colour
A single coat render applied in two passes means fast application with shorter programme periods, reduced scaffolding and site costs, as well as earlier completion of ground works.
Suitable for:
Wall
Colours
Textures
Add bookmark
Download specification
Find a stockist
Consumption calculator
Order sample
Download BIM object
weberpral M is a through-coloured
- Scraped: Applied to a total thickness of 18mm scraped to 15mm
- Sprayed roughcast: Applied to a total thickness of 15-25mm
- Dry dash: Applied to a total thickness of 15-20mm before applying aggregates
weberpral M can be used to create ashlar and quoin features, and is suitable for use on entire elevations, feature panels or smaller areas such as garden walls.
Available in England, Scotland and Wales. For Republic of Ireland and Northern Ireland, see weberpral D.
Final façade finish:
- Finished with either a scraped texture, sprayed roughcast texture or can be dry dashed
- Through-coloured
monocouche render available in 24 popular colours - Can be finished with ashlar and quoin detailing
- Weather and algae resistance for low maintenance
Application
- Applied in two passes as a single coat for shorter programme periods
- Formulated to be spray applied by render pump for faster application but can also be applied by hand with a hawk and trowel
- Can be used onto most types of masonry
Certification & classification
BBA approved (Certificate number 17/5464)- Accepted by the NHBC in relation to NHBC standards
- For an
NSAI approved product, see weberpral D A1 reaction to fire classification in accordance with BS EN 998-1:2016 5.3.3- Wc2 water capillary absorption classification in accordance with BS EN 1015-18:2002 (EN 998-1:2016)
Sustainability
- Environmental Product Declaration (EPD) available here
- 7.5kg CO₂ per 1kg of weberpral M (Chalk)
- 8kg CO₂ per 1kg of weberpral M (Colours)
- Do not apply if frost is forecast within 24 hours of use
- Do not apply in damp or wet conditions
- Do not apply in temperatures below 5°C or above 30°C
- Do not apply in direct sunlight or where the substrate is hot
- Not suitable for use on construction board substrate (concrete particle board/render board), use weberend MT
- Not suitable for use on insulation board substrate, use webertherm XP
- When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from the date of manufacture printed on the side of the bag