About this product
weber.rend BPM is a coloured, polymer-modified, dry powder, cementbased mortar.
Features and Benefits
- Polymer modified for improved water shedding
-
Pre-bagged mix reducing wastage with small manageable batches
-
No colour tinting required on site
-
Quality controlled and factory blended to give a consistently high quality product
-
Practical benefits of smooth application, speed, economy and long shelf life
Preparation
All surfaces must be sound, clean, dry and free from any material which may impair adhesion.
Scaffolding must be independently tied to allow uninterrupted application. Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified.
Mixing and application
Mix weber.rend BPM to a workable consistency by adding clean water only.
Apply the pointing mortar carefully to the joints on the weber.therm XB system using a special refillable cartridge gun with interchangeable nozzles.
To ensure colour consistency the material required for complete and adjoining panels should be of the same batch number.
Good practice Do not apply:
-
If frost is forecast within 24 hours of use
-
In damp/wet conditions
-
In temperatures below 5°C or above 30°C
-
On elevations in direct sunlight or where the substrate is hot
Colours
weber.rend BPM pointing mortar is available in a range of 6 colours. Specifiers should consult the Colour Charts on the right hand side of this page and, whenever possible, obtain samples prior to specification.
Coverage / Yield
| Use | Nominal thickness | Coverage |
| Pointing | 5 - 10 mm | 3 kg/m2 |
Note
: This estimate takes no account of wastage.
Storage and Shelf life
When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture.
Health and Safety
Contains cement.
For further information, please request the Material Safety Data Sheet for this product.
Technical services
weber's Customer Services Department has a team of experienced advisors available to provide on-site advice both at the specification stage and during application. Detailed specifications can be provided for specific projects or more general works. Site visits and on-site demonstrations can be arranged on request.
Technical helpline
Tel: (01525) 722110
Fax: (01525) 718988
Sales Contact
Sales, England and Wales
Tel: (01525) 722100
Fax: (01525) 718988
Sales, Scotland
Tel: (0141) 445 0121
Fax: (0141) 445 0122
Sales, Ireland
Tel: (028) 9335 2999
Fax: (028) 9332 3232
