About this product
weber.plast P is an acrylic based, silicone-enhanced, breathable and protective coating, for masonry and rendered surfaces.
Features and Benefits
- Highly weather resistant
- Good filling properties
- Breathable - allows water vapour diffusion
- High build, resilient coating with excellent opacity
- Available in a full range of colours with good colour retention in a matt finish
- Durable life expectancy in excess of 10 years
- Manufactured under BSI Quality Assurance Scheme ISO 9002 (1994)
Colours
weber.plast P is available in a wide range of colours. Specifiers should consult the NCS Colour Chart.
Final colour selection must be made against an actual sample. Weber will not accept responsibility for colours chosen from any source other than an actual sample.
Colour samples are freely and readily available from Weber.
Constraints
weber.plast P should not be used on waterretaining structures or in situations where 'ponding' of water may occur.
The quality of application of this material depends on suitable operative skills and product familiarity.
Restrictions on weather conditions during application and curing must be respected.
Sound trade practices and printed instructions must be followed.
Good access and appropriate protection must be provided.
Always follow the instructions on the packaging.
Preparation
On new, clean, dry, sound substrates priming is not generally required. However, if the substrate is old and porous or very dense it should be primed with weber PR310.
New surfaces should be clean, sound and dry. Existing walls, with traces of lichen, moss or fungal growth, should be treated with weber CL150 fungicidal wash, in accordance with the manufacturer's instructions.
Brush down to remove all traces of loose or flaking material.
Application
New render and EWI systems
First coat
Apply weber.plast P silicone enhanced paint diluted with water by approximately 15 - 20% by brush or roller.
Second coat
Apply a second, undiluted coat when the first coat is dry, normally between 6 and 24 hours.
Existing/old render
Prepare as above, then:
Primer coat
Apply weber PR310 as directed with a brush or roller.
First coat
Apply weber.plast P silicone enhanced paint diluted with water by approximately 15 - 20% by brush or roller.
Second coat
Apply weber.plast P silicone enhanced paint diluted with water approximately 5 - 10% by brush or roller
Good practice
Do not apply:
- If frost is forecast within 24 hours of use
- In damp/wet conditions
- In temperatures below 5°C or above 30°C
- On elevations in direct sunlight or where the substrate is hot
Coverage / Yield
Depending on the type of surface and the porosity:
|
Use |
Nominal thickness |
Coverage |
|
weber.plast P |
N/A |
0.27 litre/m2 |
Storage and Shelf life
Wet pre-mixed materials must be stored frost-free and protected from direct sunlight and extreme heat. To prevent ingress of air, buckets should be stacked no more than 2 high, and where a central support is used, to a maximum height of 4. When stored under these conditions, the shelf life of the product is 12 months from the date of manufacture.
Health and Safety
Essentially not hazardous.
Not harmful during normal use.
After contact with skin, wash immediately with plenty of water.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Keep out of the reach of children.
For further information, please request the Material Safety Data Sheet for this product.
Technical services
weber's Customer Services Department has a team of experienced advisors available to provide on-site advice both at the specification stage and during application. Detailed specifications can be provided for specific projects or more general works. Site visits and on-site demonstrations can be arranged on request.
Technical helpline
Tel: (01525) 722110
Fax: (01525) 718988
Sales Contact
Sales, England and Wales
Tel: (01525) 722100
Fax: (01525) 718988
Sales, Scotland
Tel: (0141) 445 0121
Fax: (0141) 445 0122
Sales, Ireland
Tel: (028) 9335 2999
Fax: (028) 9332 3232
