plastene primer 

plastene primer is a factory produced product containing mineral aggregates, dispersed resin binders and pigments.

• Low viscosity
• Factory batched for consistency
• Practical benefits of ease of application, speed, economy and long shelf-life
• Technical support from a Quality Assured Company
• Established track record in varying climatic conditions

plastene primer is an effective method of preparing substrates by equalising or reducing excessive suction prior to the application of plastene SG and renovex P levelling coat.

Do not apply:

• On horizontal or sloping surfaces exposed to wet conditions
• Below DPC level
• On hot or frozen / thawing surfaces

The quality of application of this material depends on suitable operative skills and product familiarity.

Restrictions on weather conditions during application and curing must be respected.

Sound trade practices and printed instructions must be followed.

Good access and appropriate protection must be provided.

Substrates must be clean, sound, dry and free of dust or other contamination.

Stir well in buckets prior to applying to the work area.

plastene primer is ready to use - do not add water.

Apply to the wall surface using brush or a wool roller, ensuring complete coverage of all areas before over coating.

Apply two coats of plastene primer when using the translucent aggregate finishes of plastene SG and when applying over fair-faced lightweight concrete blockwork.

Primer should be applied at least 24 hours prior to application of plastene SG or renovex P levelling coat. The drying period will vary according to weather conditions.

Apply in temperature (ambient and surface) between 5°C and 30°C.

Spillages stain and are difficult to remove so:

• protect vulnerable areas thoroughly
• wear protective clothing

Do not apply:

• During very humid weather conditions or if rain is forecast
• During extreme hot weather or when exposed to strong winds
• On damp or frozen / thawing surfaces

Clean tools after use with water.

Use Nominal thickness Coverage Primer N/A 200-300 g/m²

Note: This estimate takes no account of wastage and will vary according to the type of substrate. Allowance must be made for extra material required on high suction substrates.

When stored airtight in a dry place at temperatures above 5°C and protected from frost, shelf life is 12 months from date of manufacture.

Essentially not hazardous.
Not harmful during normal use. After contact with skin, wash immediately with plenty of water.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Keep out of the reach of children. For further information please refer to the relevant Material Safety Data Sheet.

weber's Customer Services Department has a team of experienced advisors available to provide on-site advice both at the specification stage and during application. Detailed specifications can be provided for specific projects or more general works. Site visits and on-site demonstrations can be arranged on request.

Technical helpline
Tel: (01525) 722110
Fax: (01525) 718988

Weber products are distributed throughout the UK through selected stockists and distributors. Please contact the relevant Customer Services Team below for all product orders and enquiries.

England and Wales:-

Tel: 08703 330070

Fax: 01525 718988

Scotland, Northern Ireland, Isle of Man, Republic of Ireland:-

Tel: 028 9335 2999

Fax: 028 9332 3232