About this product
weber.rend fibrelite is a factory batched, polymer-modified lightweight mortar designed for overcoating existing renders.
Features and Benefits
- Polymer modified for improved bond strength
- Good water shedding characteristics
- Reduced density and shear load
- Fibre reinforced for crack control
- Factory batched for consistency
- Practical benefits of smooth application, speed, economy and long shelf-life
- Established track record in varying climatic conditions
Colours
weber.rend fibrelite is available in a range of 11 colours. Specifiers should consult the Colour Chart on page 32 of the specifiers' handbook weber render solutions and, whenever possible, obtain samples prior to specification.
Preparation
Drench the surface with weber CL150, if required, to treat organic growth in accordance with product instructions.
Thoroughly brush down existing dashed surfaces to remove loose aggregate and dead organic growth.
Wet down scratched undercoat surface with water spray, as required to control suction.
Where the substrate has excessive suction that cannot be controlled by wetting down, weber PR340 should be used in accordance with the relevant data sheet.
Mixing
Mix weber.rend fibrelite by adding clean water only to achieve workability.
This mortar can be made up in any batch size desired with little wastage because it is pre-mixed dry. Add no other materials unless directed.
Application
Apply to the wall 6 - 10 mm thick according to substrate and finish with selected dry-dash.
To ensure colour consistency, the materials required for complete and adjoining panels should be of the same batch number or be thoroughly mixed together before use.
Good practice
Do not apply:
- If frost is forecast within 24 hours of use
- In damp/wet conditions
- In temperatures below 5°C or above 30°C
- On elevations in direct sunlight or where the substrate is hot
Storage and Shelf life
When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture.
Health and Safety
Contains cement (Contains chromium (VI). May produce an allergic reaction). Harmful by inhalation. Irritating to eyes and skin. Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical help. After contact with skin, wash immediately with plenty of soap and water. Wear suitable protective clothing, gloves and eye/face protection.
For further information, please request the Material Safety Data Sheet for this product.
Technical services
weber's Customer Services Department has a team of experienced advisors available to provide on-site advice both at the specification stage and during application. Detailed specifications can be provided for specific projects or more general works. Site visits and on-site demonstrations can be arranged on request.
Technical helpline
Tel: (01525) 722110
Fax: (01525) 718988
Sales Contact
Sales, England and Wales
Tel: (01525) 722100
Fax: (01525) 718988
Sales, Scotland
Tel: (0141) 445 0121
Fax: (0141) 445 0122
Sales, Ireland
Tel: (028) 9335 2999
Fax: (028) 9332 3232
