About this Product
weberplast TF is an acrylic based, composite, decorative finish, pre-mixed and ready to apply in wet form.
Features and Benefits
- Factory batched and ready to use
- Excellent all-round weather performance
- Durable and resilient
- Technical support from a Quality Assured company
- Established track record in varying climatic conditions
- Forms part of a number of BBA approved insulation systems
The quality of application of this material depends on suitable operative skills and product familiarity.
Restrictions on weather conditions during application and curing must be respected.
Sound trade practices and printed instructions must be followed.
Good access and appropriate protection must be provided.
Colours & Finishes
weberplast TF is available in a wide range of colours. Specifiers should consult the Weber Synthetic Colour Guide for more information.
Final colour selection must be made against an actual sample. Weber will not accept responsibility for colours chosen from any source other than an actual sample.
Colour samples are freely and readily available from Weber.
Weber's Customer Services Department has a team of experienced advisors available to provide on-site advice both at the specification stage and during application. Detailed specifications can be provided for specific projects or more general works. Site visits and on-site demonstrations can be arranged on request.
Tel: (01525) 722100
Fax: (01525) 718988
Sales, England and Wales
Tel: (01525) 722100
Fax: (01525) 718988
Sales, Scotland, Northern Ireland, Isle of Man, Republic of Ireland
Tel: (028) 9335 2999
Fax: (028) 9332 3232
Material Safety Datasheet
Preparation & Application
weberplast TF is a wet pre-mixed material contained in 15kg sealed polythene buckets. It is applied to prepared surfaces on to a tinted primer.
Prime the prepared surface using weber PR310 applied by brush or spray. Ensure complete coverage of wall to be treated to prevent 'grinning through' of the background. Primer is of low viscosity and easily applied. Check batch numbers and colours of material required to complete working area. Stir well in buckets and make minor adjustments to workability with a little water, thoroughly mixed in.
Apply weberplast TF with a steel float and hawk to work area. Use a thin plastic float to finish weberplast TF.
Evenness of cover and texture are of paramount importance. Agree acceptable finished appearance on a sample area with architect or supervising officer before proceeding with large-scale application. Maintain a steady flow of application and keep a wet edge on all incomplete areas.
weberplast TF is a synthetic material, therefore weather conditions for applying and drying are critical. Dry weather may not be enough if the humidity is high and the drying potential of the atmosphere is low. A dry atmosphere which can be foreseen for about 36 hours is preferred to effect initial curing and prevent wash-off. Otherwise proper weather protection for the work may be necessary.
Synthetic mixes can stain and are difficult to remove so protect vulnerable areas thoroughly and wear protective clothing, particularly gloves.
Do not apply:-
- If frost is forecast within 24 hours of use
- In damp wet conditions
- In temperatures below 5°C or above 30°C
- On elevations in direct sunlight or where the substrate is hot
Packaging, Health & Safety
weberplast TF is packaged in 15kg sealed polythene buckets with batch code, description and colour (where appropriate) on the side.
Storage and Shelf Life
Wet pre-mixed materials must be stored frost-free and protected from direct sunlight and extreme heat. To prevent ingress of air, buckets should be stacked no more than 2 high, and where a central support is used, to a maximum height of 4. When stored under these conditions, the shelf life of the product is 12 months from the date of manufacture.
Health and Safety
Essentially not hazardous.
Not harmful during normal use.
After contact with skin, wash immediately with plenty of water.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Keep out of the reach of children.
For further information, please request the Material Safety Data Sheet for this product.
Other products in the range
Polymer-modified, through coloured, decorative finish
White travertine finish
Tyrolean and rubbed-tyrolean finish
Multi-textured resin based finish
Silicone-based, through-coloured, decorative finish
A high performance mineral paint with a low-maintenance finish for external walls