About this Product
Tyrolean and rubbed-tyrolean finish
- Suitable for internal or external use
- Suitable for most environments - coastal, town suburban and rural
- Suitable substrates: Externally weberend OCR;traditional cement rendering;fair faced concrete;exterior grade composition and cement boards;
This list is not exhaustive and other smooth, flat surfaces may be considered.
In addition, brickwork and blockwork may be coated where the joints will be accepted as a feature.
The substrate must show some suction to achieve the cullamix tyrolean texture.
Features and Benefits
- Pre-blended - requires only the addition of clean water on site
- Durable and weather resistant
- Through coloured - requires minimal maintenance and no subsequent painting
- Suitable for most environments: coastal, suburban and rural
- Can be used as an attractive, soundabsorbing textured finish on internal render
Do not apply to gypsum plaster or previously painted surfaces.
Colours & Finishes
cullamix tyrolean is available in a range of 6 Millennium Colours. Specifiers should consult the Colour Chart on page 31 of the specifiers’ handbook Weber Render Solutions and, whenever possible, obtain samples prior to specification.
Note: As with all batch-made materials an exact colour match cannot always be achieved.
Cullamix Tyrolean is a cementitious finish; BS 5262 Code of practice for external renderings, and BS 8000-10 Workmanship on building sites. Code of practice for plastering and rendering, should be followed at all times.
Suitable specification clauses for dealing successfully with most types of substrates are available from our Technical Services Department.
Fire resistance cullamix tyrolean is non-combustible and would be expected to meet a Class 0 fire rating when applied to non-combustible substrates.
weber's Customer Services Department has a team of experienced advisors available to provide on-site advice both at the specification stage and during application. Detailed specifications can be provided for specific projects or more general works. Site visits and on-site demonstrations can be arranged on request.
Tel: (01525) 722110
Fax: (01525) 718988
Sales, England and Wales
Tel: (01525) 722100
Fax: (01525) 718988
Tel: (0141) 445 0121
Fax: (0141) 445 0122
Tel: (028) 9335 2999
Fax: (028) 9332 3232
Material Safety Datasheet
Declaration of Performance (DoP)
Preparation & Application
All surfaces must be sound, clean, dry and free from any material which may impair adhesion. Rendering should be of good alignment, finished with a wood or plastic float and unkeyed.
Scaffolding must be independently tied to allow for an uninterrupted application. Any faults in the structure, particularly those which may lead to moisture penetration must be rectified.
To avoid dampness and discolouration external finishes should be avoided below DPC or within 150 mm of ground level.
Mask around the areas where material is to be applied. Masking tape must be removed before the material has dried.
Expansion joints should be included as required by the substrate and carried through all applied materials.
Mix 5 measures of cullamix tyrolean with 2 measures of clean water in a suitable container. Mix for 3 - 4 minutes to a thick, pourable consistency.
Mix only sufficient material for use within the hour. Stir frequently to avoid settlement.
To ensure colour consistency, the materials required for complete and adjoining panels should be of the same batch number or be thoroughly mixed together before use.
cullamix tyrolean is applied using a handoperated machine available from suppliers of weber products. Alternatively machines may be hired from local hire shops.
cullamix tyrolean may also be applied by an open hopper spray machine. Finer textures are more typical of applications using this type of equipment.
The tyrolean finish is obtained by building up several passes to a finished thickness of 4 - 6 mm. Care should be taken to leave sufficient time between passes to avoid merging and patchiness in the texture. The direction of application should be varied with successive passes.
Splashes and overspray should be removed immediately with clean water.
For a rubbed tyrolean finish, the application of cullamix tyrolean as above must be of the highest standard. When this is hard, but not fully cured, remove the peaks by rubbing in circular action with a carborundum stone. Brush out any dust on completion.
Curing with a fine spray of clean water may be necessary during rapid drying conditions. In hot climates curing as above is essential for 3 - 5 days after application.
Protect from unfavourable weather conditions during application and curing.
Note: As with all cement-based products, cullamix tyrolean may be subject to lime bloom. The likelihood of lime bloom occurring is increased when applied in adverse weather conditions or if the background is damp.
Good practice Do not apply:
- If frost is forecast within 24 hours of use
- In damp/wet conditions
- In temperatures below 5°C or above 30°C
- On elevations in direct sunlight or where the substrate is hot.
All equipment must be washed with clean water immediately after use. Waste material should not be emptied into drainage systems.
Packaging, Health & Safety
Cullamix Tyrolean is supplied in 25 kg bags.
Coverage / Yield
For each mm of thickness, you will require approximately 1 kg/m2.
When applied at a thickness of 4 - 6 mm, coverage is approximately 5 m2 per 25 kg bag.
Note: These estimates take no account of wastage and will vary according to the type of surface involved. Coverage is dependent on the texture applied and suction of the backing surface involved.
Storage and Shelf Life
When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture.
Health and Safety
Contains cement (Contains chromium (VI). May produce an allergic reaction). Harmful by inhalation. Irritating to eyes and skin. Keep out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical help. After contact with skin, wash immediately with plenty of soap and water. Wear suitable protective clothing, gloves and eye/face protection.
For further information, please request the Material Safety Data Sheet for this product.
Other products in the range
Polymer-modified, through coloured, decorative finish
White travertine finish
Multi-textured resin based finish
Acrylic-based, composite, decorative finish
Silicone-based, through-coloured, decorative finish
A high performance mineral paint with a low-maintenance finish for external walls