weber.thermXM

weber.therm XM is a high performance external wall insulation system protected by meshcloth reinforced polymer renders.

weber.therm XM systems have BBA approval covering various types of insulation and many render finishes.

• Provides efficient thermal insulation for refurbishment and new build projects

• Comprehensive range of colours and textures enable the creation of striking visual effects
• Has a high performance water shedding range of finishes to protect the building fabric

• Low K-value insulants allow thinner insulation to be used or higher standards to be achieved

• Eliminates interstitial condensation by creating a 'warm wall' construction

• Suitable for, and effective on most buildings - including lightweight steel frame structures and in-fill panels

• Supported by comprehensive technical and architectural services

• BBA approved certificate no. 91/2600 with Irish Building Regulations Statement

The quality of application of these materials depends on suitable operative skills and product familiarity.

Restrictions on weather conditions during application and curing must be respected.

Sound trade practices and printed instructions must be followed.

Good access and appropriate protection must be provided.

• weber CL150
• weber.rend stipple
• weber.rend TUC
• weber.rend LAC
• weber.rend PTC
• weber.rend PTS
• weber PR310
• weber.plast TF/DF
• weber.sil TF
• weber.plast P

Existing rendered substrates
Hammer test and remove all areas of loose, 'bossed' render.

Treat surfaces with weber CL150, a biocidal wash, to remove
any traces of organic growth.

Make good surface using weber.rend stipple and
weber.rend TUC or weber.rend PUC

New build masonry or frame structure
Ensure all surfaces are clean, in-plane and of adequate thickness
to provide appropriate support and stiffness without deflection or
edge protrusions.

Beads, trims and flashings
Full system beads are available in polyester, powder coated
galvanised mild steel, grade 304 austenitic stainless steel
or aluminium in 3 m and 2.5 m lengths.

Render only beads are available in coated, galvanised, stainless,
coated aluminium or rigid plastic in 3 m and 2.5 m lengths.

Trims and flashings such as overcills and copings are available
in PPC aluminium in 2.5 m lengths or made to order.

Fixings
A wide range is available to accommodate all insulant thicknesses
and substrate types. Fixings are specified on a project by project
basis and pull-out values are established to ensure the EWI system
is securely fixed back to the substrate.

Undercoat

weber.rend LAC is a factory batched mortar for bonding and
scrimming within the meshcloth systems

Topcoats
Where specified, coloured topcoats are available for use as a background
for dry dash, a scraped textured finish or smooth float finish for synthetic
textured coatings.

During the planning stages of a project, advice should be sought from Weber technical staff.

Advice based on technical expertise together with unrivalled practicalexperience is freely available and covers:

Design: assistance with the selection of the appropriate system,including working details and U-value calculations.

Pre-Contract Documentation: specifications, typical detailsmethod statements.

Contract Documentation: site packages, available throughthe specialist contractor. These include approved details, specificationand site procedures.

weber Customer Services Department has a team of
experienced advisors available to provide on-site advice both at the
specification stage and during application. Detailed specifications
can be provided for specific projects or more general works.
Site visits and on-site demonstrations can be arranged on request.

Technical helpline
Tel: (01525) 722110
Fax: (01525) 718988

Sales, England and Wales
Tel: (01525) 722100
Fax: (01525) 718988

Sales, Scotland
Tel: (0141) 445 0121
Fax: (0141) 445 0122

Sales, Ireland
Tel: (028) 9335 2999
Fax: (028) 9332 3232