About this product
renovex P is a ready-mixed levelling treatment for facades prior to the application of decorative coatings such as the santane and plastene coating systems and finishes. It is an acrylic polymer dispersion containing selected aggregates and additives.
Features and Benefits
- Ready-mixed product
- Water-based
- Disguises joints and irregularities in substrates which would otherwise be visible in decorative coatings
- Certification; Cahier des Charges VERITAS (on mosaics and ceramic tiles) No. 5159 UTN 788100
Technical data
Constraints
Do not apply:
On horizontal or sloping surfaces exposed to wet conditions
Below DPC level
Onto flexible coatings
Preparation
Surfaces must be clean, sound, dry and well adhered to the background.
On roller applied polymer-based coatings, scrape and flatten the textured surface by suitable means in order to reduce the thickness of application of renovex P.
Clean the surface by using a high pressure water jet.
On porous/dusty surfaces, apply one coat of weber SL410.
Application
Prior to applying renovex P, prime with one coat of weber PR335 using a wool roller or a brush. Depending on climatic conditions, allow at least 4 hours for the primer to dry out. renovex P is ready to use: do not add water.
Apply renovex P using a stainless steel trowel, and level out. The thickness of application may vary from 0.5 mm to 2.5 mm per coat up to a maximum of 5 mm thickness (in 2 coats).
Allow the renovex P to dry out (3 hours between coats) and then remove any imperfections from the hardened surface with the edge of a smoothing trowel.
Allow 2 to 3 days for renovex P to completely dry prior to applying any other coating.
Apply in temperatures (ambient and surface) between 5°C and 30°C.
Do not apply:
- During very humid weather conditions or if rain is forecast.
- During extreme hot weather or when exposed to strong winds.
- On damp or frozen/thawing surfaces.
- On hot or frozen/thawing surfaces. Clean tools after use with water.
Coverage / Yield
Approximately 1.5 to 2.0 kg per mm of thickness applied.
Note: These estimates take no account of wastage and will vary according to the type of surface involved.
Storage and Shelf life
Store in dry conditions between 5°C and 30°C.
Shelf life of material in unopened plastic bucket kept under correct storage conditions is at least 12 months.
Protect from frost.
Do not over-stack.
Health and Safety
Essentially not hazardous.
Not harmful during normal use.
After contact with skin, wash immediately with plenty of water.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Keep out of the reach of children.
For further information, please request the Material Safety Data Sheet for this product.
Technical services
weber's Customer Services Department has a team of experienced advisors available to provide on-site advice both at the specification stage and during application. Detailed specifications can be provided for specific projects or more general works. Site visits and on-site demonstrations can be arranged on request.
Technical helpline
Tel: (01525) 722110
Fax: (01525) 718988
Sales Contact
Sales, England and Wales
Tel: (01782) 813028
Fax: (01782) 839028
Sales, Scotland
Tel: (0141) 445 0121
Fax: (0141) 445 0122
Sales, Ireland
Tel: (028) 9335 2999
Fax: (028) 9332 3232
